There are many different pressure transmitters on the market and it is not easy to choose the right one. Which should you scale out depends on your needs, of course. You may want one with great local support, or international identity, or other criteria I can’t think of off the top of my head. It’s hard to list all the reasons you might choose a device. But to help get you started, we collected the 7 best pressure transmitters on the market.

With that in mind, I created a new list of outstanding pressure devices on the market from the most common vendors worldwide. If you think we missed one, then let us know in the comments, and we’ll include it in the next list or another article.

If one of these devices piques your fancy, contact your local sales rep for more information and get your research on!

The 7 best pressure transmitters on the market

Deltabar FMD72 – Endress+Hauser

Usually, when you have a level device that uses a diaphragm seal or seal pot, you may run into problems with ice, clogging, leaks, and more. However, now you can avoid these problems with the Deltabar FMD72 from Endress+Hauser.

Pressure transmitters
Courtesy of Endress+Hauser

This transmitter has two electronic sensors for high and low pressure.  The sensors send digital values to the system to calculate the pressure, level, volume, or mass of your liquids. Using a cable to connect the sensor to the transmitter lets you install the transmitter in a better place for visualization and setup through the local display.

Each sensor has an accuracy of +-0.005 percent and the system up to 0.07 percent. It also comes with different process connections and a temperature range of the transmitter from -40 to +125 degrees Celsius. Last but not least, you get a bunch of certifications for explosive areas and hygienic installation.

To find out more: Endress+Hauser Deltabar FMD72.

Rosemount Wireless Pressure Gauge – Emerson

Maybe you didn’t think that a traditional manometer could be updated to align with the Industrial Internet of Things (IIoT) concept. Emerson Automation Solutions flies in the face of your assumptions with the Rosemount Wireless Pressure Gauge. It could use a better name, but it comes with some good options.

Pressure transmitters
Courtesy of Emerson Automation Solutions

This standard device has a wireless digital connection built in to allow external monitoring of the process information and health of the device. It creates a good balance between old and new to satisfy even the fussiest of operators – traditional manometer and local indicator paired with wireless data transmission.

You have different options, such as gauge, absolute, compound, and vacuum. Moreover, the accuracy goes up to 0.5 percent with a measurement range up to 4000 psi. It uses wirelessHART and has a battery lifetime of up to 10 years.

CPG1500 – WIKA

Here we have another example of how to bring the manometer to another level. The crew from WIKA have a digital pressure gauge which serves up more than just the pressure of your process.

The CPG1500 offers a digital display and bar graphs to visualize the process information, diagnostics, battery life, and setup. It has a proprietary wireless protocol for the datalogger and transmitter setup, with Bluetooth as a nice bonus.

pressure transmitters
Courtesy of Wika

It can also measure up to 1000 bar, with options like vacuum and absolute pressure ranges. It has an accuracy of up to 0.05 percent and a datalogger function that can register up to 50 measured values per second!

OPTIBAR PC 5060 C – Krohne

The 5060 C gives you a flexible solution with good features. It offers good resistance and reliability in different types of process, with its built-in ceramic measuring cell.

pressure transmitters
Courtesy of Krohne

You can use the 5060 C from 25 millibars to 100 bar, and it also offers a flexible process temperature resistance up to 150 degrees Celsius. It even has seamless integration in the HART, FOUNDATION Fieldbus (FF), and PROFIBUS PA protocols. Plus you can set up the transmitter through the local display or with a field communicator.


The VEGABAR 82 can measure vapors, gases, and liquids and has a high abrasion resistance with its built-in ceramic measuring cell. It has a flexible measuring range from -1 to 100 bar and a temperature range from -40 to 150 degrees Celsius.

pressure transmitters
Courtesy of Vega

You can get different types of wetted parts material, process connections, and approvals. It also comes with several integration possibilities in its PROFIBUS PA, FF, analog, HART, or Modbus protocols. Furthermore, the display has built-in Bluetooth that lets you set up using your smart phone, tablet, or laptop.

SITRANS P500 – Siemens

We already reviewed this product, so I’ll summarize. The P500 offers high accuracy, up to 0.03 percent, and stability, up to 0.05 percent. You can find a measuring range to fit your process, and it allows local configuration through its push buttons, so you don’t need a handheld to set up.

Courtesy of Siemens

Compared to the others pressure transmitters, its integration falls a little short, with only analog and HART. If you want a digital protocol like FF or PROFIBUS, you’ll need to keep shopping.

STD800 – Honeywell

We also reviewed the STD800. It has an excellent display with all the necessary process data and device diagnostics. You can also set it up locally without a field communicator using its three push buttons on top.

Courtesy of Honeywell

The STD800 gives you its standard accuracy as 0.035 percent and offers an option of up to 0.025 percent. It’s pretty flexible to integrate too, in its analog, HART, FF, and proprietary protocol to connect to your control system. Furthermore, it has plenty of certifications for different processes.


As you can see, there are many options on the market. If you still can’t find the best pressure transmitter for your application, give us a call and we will help.

Find and buy pressure transmitters in our online shop

Pick your favorite, scale out, and buy buy buy!

pressure transmitters
Courtesy of Giphy
Empfohlene Artikel