Important information regarding the COVID-19 coronavirus outbreak

30-day return policy

Free delivery in the EU

Expert engineering support

System Components

Da Xu

Da Xu will help you to find the right product:

+49 (0)30 509 308 800

shop@visayasolutions.com

☆
RN221N

Supply isolator with auxiliary power for safe separation of 4...20 mA standard signal circuits
Input: 1 x analog4...20 mA
Output: 1 x analog4...20 mA
Output relay: 1 x NO contact
☆
RB223

Single or dual channel passive isolator for 4...20 mA standard signal circuits
Input: 2 x analog 4…20 mA
Output: 2 x analog 4...20 mA
Bidirectional HART® transmission
☆
HAW562

Overvoltage protection device for DIN rail according to IEC 60715
Operating voltage: 24V/60V/230V/5V/12(80)V/24V
For use in hazardous areas - optionally available with intrinsically safe SIL2 approval
Vibration and shock tested according to EN 60068-2
☆
HAW569

Overvoltage protection device for field mounting
Operating voltage: 24V/120V/230V
Compact device for the protection of signal / communication lines
Optionally available with intrinsically safe SIL2 approval
☆
Configuration kit TXU10

Configuration kit for PC-programmable devices
Set-up programme+interface cable for PC
With USB-Port
4 pin plug
☆
RNB130

Primary switched-mode power supply on DIN rail
Output: 24 VDC, 1.5 A
dimensions: 102,5 x 99 x 35 mm
Space-saving DIN rail mounting according to IEC 60715
☆
Nivotester FTL325N

Level indicator with NAMUR input for connection of any NAMUR sensor
Connection of one, two or three measuring cells (1-, 2- or 3-channel instruments)
Limit level signal is triggered at a MIN or MAX filling level, depending on selection
Large measuring range influences measuring range depending on the installation location of the sensors
☆
TRIO-PS-2G/1AC/24DC/5/B+D

Primary-switched TRIO POWER power supply with push-in connection for DIN rail mounting
Increased system availability (dynamic boost with 150% of the nominal current for five seconds)
Maximum flexibility (wide temperature range from -25°C to +70°C and device startup at -40°C)
Electrically robust (high electric strength)
☆
KLIPPON K2

Aluminium empty enclosure
Closed-form seal (no glued splice)
Impact resistance: 10.00 J
Protection degree: IP66, IP67, IP68
☆
ACT20M-AI-AO-S

Configurable signal converter/insulator with sensor supply and input/output : I / U
Galvanic isolation: 3-way isolator
Width x Height x Depth (mm): 6.1 x 112.5 x 114.3
Type of connection: Screw connection
☆
ACT20X-2HDI-2SDO-RNO-S

Dual channel digital signal converter/isolator
Converts Ex-input: NAMUR sensor/switch (2 Nos.) to Safe-output: relay, NO contact (2 Nos.)
Response time < 10 ms (relay output)
SIL 2 compliance as per IEC 61508
☆
ACT20M-2CI-2CO-ILP-S

Universal isolating amplifier for recording electrical and physical parameters with galvanic isolation
Input : 2 x 4-20 mA, Output : 2 x 4-20 mA
Galvanic isolation: 2-way isolator
Width x Height x Depth (mm): 6.1 x 112.5 x 114.3
☆
ACT20X-2HDI-2SDO-RNC-S

Dual channel digital signal converter/isolator
Converts Ex-input: NAMUR sensor/switch (2 Nos.) to Safe-output: relay, NC contact (2 Nos.)
Response time < 10 ms (relay output)
SIL 2 compliance as per IEC 61508
☆
ACT20X-HDI-SDO-RNO-S

Single channel digital signal converter/isolator
Converts Ex-input: NAMUR sensor/switch (1 No.) to Safe-output: relay, NO contact (1 No.)
Response time < 10 ms (relay output)
SIL 2 compliance as per IEC 61508
☆
ACT20X-HDI-SDO-RNC-S

Single channel digital signal converter/isolator
Converts Ex-input: NAMUR sensor/switch (1 No.) to Safe-output: relay, NC contact (1 No.)
Response time < 10 ms (relay output)
SIL 2 compliance as per IEC 61508
☆
ACT20X-HUI-SAO-S

Single channel signal converter/insulator
Converts Ex-input: RTD, TC, Potentiometer, Current or Voltage (1 No.) to Safe-output: Current & Relay (1 No.)
SIL 2 Certified
Width x Height x Depth (mm): 22.5 x 117.2 x 113.6
☆
ACT20M-AI-AO-E-S

Configurable signal converter/insulator with input/output : I / U
Galvanic isolation: 3-way isolator (no sensor supply)
Width x Height x Depth (mm): 6.1 x 112.5 x 114.3
Type of connection: Screw connection
☆
KLIPPON STB 1 SS

Stainless Steel enclosure for energy, process and transportation industries
Dimension: 120 mm (w) X 120 mm (h) X 80 mm (d)
Operating temperature: -60°C to +100°C
Material: SS316L, 1.5mm thickness
☆
ACT20M-AI-2AO-S

Configurable signal converter/insulator with sensor supply and one input and 2 outputs : I / U
Galvanic isolation: 4-way isolator
Width x Height x Depth (mm): 6.1 x 112.5 x 114.3
Type of connection: Screw connection
☆
ACT20X-2HTI-2SAO-S

Signal converter/insulator for Temperature devices with 2 channel
Ex-input: 2 x 4...20mA (configurierable), Output: 2 x 0...23 mA (configurable)
Suitable for RTD & Thermocouples
Operating temperature range: -20 °C to 85 °C
☆
ACT20M-BAI-AO-S

Configurable signal converter/insulator with bidirectional input/output : I/U
High interference resistance
Galvanic isolation: 3-way isolator
Width x Height x Depth (mm): 6.1 x 112.5 x 114.3
☆
ACT20X-HTI-SAO-S

Single channel signal converter/insulator for temperature devices
Suitable for RTD & Thermocouples
Operating temperature range: -20 °C to 85 °C
SIL 2 safety category
☆
KLIPPON POK 121209 EX

Glass-fibre reinforced polyester enclosure for process and transportation industries
Dimension: 122 mm (w) X 120 mm (h) X 90 mm (d)
Operating Temperature: -55°C to +100°C
Material: Glass fibre-reinforced polyester, 4.39mm thickness
☆
ACT20X-HAI-SAO-S

Single channel rail mounted current-supply isolators
Transmit 1 x 4...20 mA signals from Ex zone 0 into the safe zone
SIL 2 safety category
Operating temperature range: -20 °C to 60 °C
☆
KLIPPON BDX M20 S

Pressure compensating element Type M20
IP 66 protection with length of the thread as 10 mm
Length (mm) x Width (mm): 22 x 27
Material: SS316L, Silicon O-Ring