Ultrasonic clamp-on flow sensor with display
- Integrated display and programming buttons
- Large, easy to read graphic display with backlighting
- Applicable for steel and plastic pipes for the size: 1 - 4.5 inch / 25 - 115 mm
The U1000 is an ultrasonic permanent/fixed clamp-on flow metering solution for measuring flow rate based on the time-of-flight principle. It can either be used as a stand alone meter or as an integral part of a control loop. The U1000 is very simple to install - clamp it on to the pipe, connect it to power and enter the pipe diameter. The clamp-on design allows the installation in running systems without opening the pipe, providing minimum downtime and maximum availability.
- Chilled Water Metering
- Demineralized Water
- Heat Exchangers
- Process Water Metering
- Pump Protection
- Textile Dyeing
- Ultra-Pure water measurement
Ultraflow U1000
Ultrasonic clamp-on flow sensor with display
Free shipping
Growing Portfolio
30 days return policy
The U1000 is an ultrasonic permanent/fixed clamp-on flow metering solution for measuring flow rate based on the time-of-flight principle. It can either be used as a stand alone meter or as an integral part of a control loop. The U1000 is very simple to install - clamp it on to the pipe, connect it to power and enter the pipe diameter. The clamp-on design allows the installation in running systems without opening the pipe, providing minimum downtime and maximum availability.
Demineralized Water
Heat Exchangers
Process Water Metering
Pump Protection
Textile Dyeing
Ultra-Pure water measurement
| General Information | |
|---|---|
| Max. error % (volumetric flow) liquid | Repeatability: ± 0.5 % of measured value |
| Response time | < 500 ms |
| Medium type | Clean water with < 3% by volume of particulate content |
| Ambient temperature range [°C] | 0 °C to 50 °C |
| Ambient temperature range [°F] | -32 °F to 122 °F |
| Allowable temperature range [°C] | 85 °C |
| Display type | 2 line x 16 character LCD with backlight |
| Configuration / Operation | Fixed |
| Additional Information | |
| Overvoltage protection | Maximum load : 620 Ω |
| Galvanic isolation | Yes |
| Electromagnetic compatibility (EMC) | BS EN 61326-1:2006/ BS EN 61326-2-3:2006 |
| Mechanical Data | |
| Nominal diameter range ["] | 1 Channel, bidirectional : 25 - 115 mm/ 1 - 4.5 inch |
| Housing / Terminal head material | Polycarbonate |
| Housing Protection/Degree of protection | IP 54 |
| Process connection | Clamp on system |
| Wetted material | Clamp on system: Sensor housing- Polycarbonate |
| Electrical Data | |
| Electrical Connection | 6-wire interface cable |
| Electrical Design | Electronics module and a guide rail, which together form a single unit and fixed to the pipe by clamps |
| Voltage Type | AC or DC |
| Power supply [V] | 12 to 24 V |
| Current consumption (min/max) [mA] | 3.5 / 500 mA |
| Output/Input | |
| Output type | 4-20 mA, 4-wire, Pulse |
| Transmitter output type | 4-20 mA, 4-wire, Pulse |
| Measurement Frequency | Frequency based mode: 0 – 200 Hz |
| Communication protocol | Digital communication via control element consit of LED and LCD display |
| Certification/Approvals | |
| Other Appprovals/Certification | CE, RoHS compliant |
| General Information | |
|---|---|
| Max. error % (volumetric flow) liquid | Repeatability: ± 0.5 % of measured value |
| Response time | < 500 ms |
| Medium type | Clean water with < 3% by volume of particulate content |
| Ambient temperature range [°C] | 0 °C to 50 °C |
| Ambient temperature range [°F] | -32 °F to 122 °F |
| Allowable temperature range [°C] | 85 °C |
| Display type | 2 line x 16 character LCD with backlight |
| Configuration / Operation | Fixed |
| Additional Information | |
| Overvoltage protection | Maximum load : 620 Ω |
| Galvanic isolation | Yes |
| Electromagnetic compatibility (EMC) | BS EN 61326-1:2006/ BS EN 61326-2-3:2006 |
| Mechanical Data | |
| Nominal diameter range ["] | 1 Channel, bidirectional : 25 - 115 mm/ 1 - 4.5 inch |
| Housing / Terminal head material | Polycarbonate |
| Housing Protection/Degree of protection | IP 54 |
| Process connection | Clamp on system |
| Wetted material | Clamp on system: Sensor housing- Polycarbonate |
| Electrical Data | |
| Electrical Connection | 6-wire interface cable |
| Electrical Design | Electronics module and a guide rail, which together form a single unit and fixed to the pipe by clamps |
| Voltage Type | AC or DC |
| Power supply [V] | 12 to 24 V |
| Current consumption (min/max) [mA] | 3.5 / 500 mA |
| Output/Input | |
| Output type | 4-20 mA, 4-wire, Pulse |
| Transmitter output type | 4-20 mA, 4-wire, Pulse |
| Measurement Frequency | Frequency based mode: 0 – 200 Hz |
| Communication protocol | Digital communication via control element consit of LED and LCD display |
| Certification/Approvals | |
| Other Appprovals/Certification | CE, RoHS compliant |
