Expert’s answer: Recommended orifice plate or vortex for steam flow meter?
An orifice plate or vortex for steam flow meter? Here’s what I recommend:
I’m inclined toward the vortex, but let’s talk about both technologies.
Orifice plates can cost less than other solutions, which makes them very popular. However, if you want a differential pressure flow meter like the orifice plate, you need to consider pressure loss in your process and calibration of the plate. This kind of device often needs specific software for full settings, which may take a while to set up.
The vortex flow meter already has the temperature transmitter inside, and you can install a pressure transmitter if you need it. You can also find a vortex flow meter with wet steam detection to check the steam quality. It’ll need inlet and outlet runs, but it’s easier to set up than the differential pressure flow meter.
Therefore, if you want quick configuration and installation, go with a vortex. If you prefer a more traditional solution, use the orifice plate. Good luck!
Want to find more information about steam flow meters? Check out these useful links that we’ve put together. They include both more information and steam flow suppliers.
Other resources that might interest you
Prowirl F200 steam flow meter
Have problems after having installed a Prowirl F200 DN80? Check this!
Vortex for steam measurement
How will a vortex flow meter in your steam flow measurement benefit you?
Steam temperature past pressure reducing station
Will the steam temperature downstream of the PRS remain the same or will it drop when the pressure is reduced at a pressure reducing station?
Vortex flow meters in low flow profile
What applications suit vortex meters best?