Thermal mass flow application
Hey. I want to use the t-mass 150 in my process, but I have a question about our application. Our blower runs for about 2 to 5 minutes about every 20 minutes. During the 20-minute intervals, the process won’t have air flow and pressure in the line. Will this have any effect on our vortex flow meter?.
Expert’s answer: Thermal mass flow application?
The t-mass 150 performs excellently, with about a two percent error margin for a thermal mass flow application. Since the meter is thermal, you always have to consider your air management. In your process, you shouldn’t have trouble with the intervals because the manufacturer always tests the meter for robustness, quality and precision. Of course, we always recommend that you follow the inlet run compensation to achieve peak performance.
You also mentioned a vortex. If you want one, you can try meters from companies like Emerson, Endress+Hauser, or Yokogawa. They can offer the same measurement quality with better precision, around 0.75 percent. Keep in mind you need a minimum velocity to provide you that precision and you’ll do fine.
Want more information about your thermal mass flow application?
Want to find the right option? Then, these companies offer vortex flow meters:
And check these for thermal flow meters:
Other resources that might interest you
Is a vortex a good solution for measuring your air flow? If so, what limitations does it have?
Air flow meter for air handler filter?
What air flow meter do we suggest as an air handler for filter testing?
Which sort of information do you need to scale out a vortex flow meter?
Multifunctional switch panel process measuring device for monitoring and displaying analog measured values