Changing flow meter line size
I have to change a discharge line pump from three inches to four, and this line has a magnetic flow meter. What parts on the meter should I change? Also, our operator said doesn't trust magmeters. Is there another type we can use? ...
High turndown flow meter
I am needing a flow meter capable of a turndown ratio of almost 70:1 (20 liters per minute down to 0.3). I haven't found a single flow meter that would do the trick. Any ideas? ...
Options for official inspections of measuring instruments
The legislation of the country where we work mandates an annual inspection of all measuring instruments. As we operate on a twenty-four-hour basis, management won't even consider process line shutdowns only for calibration. Help? ...
Magmeter measurement from volume to mass
I have a magmeter in my process, and we have a volumetric flow measurement. Can we convert the measurement to mass units? ...
Micro Motion 1700 output
Help! I tried to set up the 1700, but the output isn't working properly and I can't access the device with the handheld. We managed the basic configuration from the front display. Locally the device works fine, but the output doesn't reach my control system, which means the process values don't eith ...
Total Health Check for Yokogawa!
Do you have information about the "Total Health Check" for a Yokogawa Coriolis flow meter? ...
Unreliable density reading
We have a Micro Motion Coriolis, the CMF300 with 3500 RFT, to measure the density of condensate in a custody metering skid. Now it's not reading correctly. It shows almost 1000 kilograms per square centimeter, but it should be around 700. How do we solve this problem? ...
Flow meter with 0.05 percent accuracy!
Do you know of a flow meter that has 0.05 percent accuracy in liquid? I really need one! ...
Stainless steel turbine with mechanical counter!
I need a turbine flow meter with a stainless steel body and mechanical counter for a water application. Can anyone recommend a manufacturer? ...
Pulse or analog for custody transfer?
Since most Coriolis transmitters provide both pulse and analog 4-20 mA outputs for the reading, which works better for liquid custody transfer where the reading goes to a flow computer and why? How about the digital HART output from the transmitter? ...