ROTAMASS Total Insight installation
I bought a new Coriolis from Yokogawa, the ROTAMASS Total Insight. Is there a specific procedure I need to follow to install it? ...
Surface or thermowell sensors?
I know RTDs and thermocouples normally go in thermowells, but I see a lot about surface sensors lately. I hear that surface sensors actually offer the same accuracy and easier installation. Could you share your opinion? ...
Temperature transmitter class T3!
I am trying to install a thermowell into my process to measure the temperature of the flue gas. All temperature transmitters are in compliance with temperature class T3 means they support up to 200 degree Celsius. The surface of the application is higher than 200 degrees Celsius, is that a problem t ...
The benefits of the Heartbeat Technology
I heard about Heartbeat Technology, but I don't know how to use it and how it'll benefit my process. Could you explain? ...
Promass 200 for glycerine
I'd like to apply the Promass 200 on a product that's 50 percent glycerine. The flow range is 0-350 kilos per hour, the pressure 2 bar and the temperature 30 degrees Celsius. Can I apply a Promass F 200? ...
Terminator on PROFIBUS network!
Why do we need a terminator in our PROFIBUS network? What would happen if we left it out? ...
Multi-input temperature field converter
I need an industrial-rated (preferably Class 1 Zone 2) handheld that accepts TC type J, K, T, or two- or three-wire RTD inputs with either a corresponding mv output or 4-20 mA output. Any leads would be appreciated! ...
RTD or thermistor or thermocouple?
I need a device that can handle regular temperatures between 1100 and 1200 degrees Celsius, with excursions up to 1300 or 1400. I read that thermistors can detect ranges up to 1600 degrees Celsius. Is that true? Do you have any recommendations? ...
What happens with too many devices on FOUNDATION Fieldbus network?
What would happen if I put more devices than the recommendation in my FF network? ...
What are the HART advantages?
We need to decide which type of field network protocol to use in a new plant. Can we set up a HART network instead of a PB or FF network? What diagnostics I will lose? ...