Radar or pressure transmitter?
Nowadays, I see a lot of recommendations to use radar for level measurement. Would it benefit me to switch from a pressure transmitter to a radar level meter? ...
Volume measurement from pressure transmitter
I have a pressure device installed for level measurement, and now the operator wants to receive data on the tank volume. Can I do that using the pressure device? ...
What’s the difference between a HART and SMART device?
What's the difference between a HART device and a SMART device? ...
How to connect a pressure transmitter and HART communicator
Hi. I have a question about HART communicators and devices. Can you help? How do I connect a pressure transmitter with a HART communicator? ...
Reliable steam measurement?
What's the best technology to measure high-pressure steam flow? I want a flow meter with high accuracy, reliability, long lifespan, and low cost if possible. Also, is there a portable instrument for measuring steam? ...
Rosemount Raptor go!
Please help me configure our new wireless Raptor! I have no idea how to start working with it. ...
Emerson 5300 GWR and sludge!
We have an Emerson 5300 GWR LT! Sometimes, the level fluctuates severely. After we open and inspect the chamber, we find the rod clean but sludge in the chamber drain. After flushing the chamber, the level goes back to normal. How does this sludge cause this problem when the rod itself is clean? Can ...
Unreliable density reading
We have a Micro Motion Coriolis, the CMF300 with 3500 RFT, to measure the density of condensate in a custody metering skid. Now it's not reading correctly. It shows almost 1000 kilograms per square centimeter, but it should be around 700. How do we solve this problem? ...
Critical instruments? Plant asset management
Should we schedule replacement for our critical valve accessories (like solenoid valves and limit switches) and critical process transmitters according to their projected lifespan? ...
Endress+Hauser FMP51 output signal
Hi. We have an E+H Levelflex FMP51. The output is not changing proportionally with the level, and we already checked the output in the control room for different currents. We simulated the output from the transmitter function menu and transmitter responded, and all other related parameters checked o ...