Product Review: Pointek CLS100 from Siemens

Level Product Review

Product Review: Pointek CLS100 from Siemens

Honestly, it’s hard to get information for Siemens products on the user-UNfriendly website! I spent way more time than I wanted to there, but I finally got what I needed to talk about the Pointek CLS100 for today’s review.

This level switch can provide additional protection or simple level control for your process. We’ll take a look at the features, pros and cons, and potential applications. Stick with me and let’s learn more about it!

Disclaimer: This product review examines only features, not performance. If you’ve used this device, feel free to share your experience in the comments. This content serves the purpose of providing information if you want a new device.

Whatcha got there?

In general, the design doesn’t have anything fancy about it, but that’s fine. You can’t expect much from a simple product, and it follows the Siemens style at least.

The Pointek CLS100 works based on the inverse frequency shift capacitance principle. Yeah, I know. It’s a mouthful and one of the more complex measuring principles. But basically, the device charges the probe electrode with up to 10 volts of direct current. Then, it discharges that accumulated charge and measures the charge/discharge times. A few more things have to happen to get you your numbers, but that gives you the general idea.

Courtesy of Siemens

This device comes in three versions – integrated cable, standard enclosure, and fully synthetic.

What can it do?

As a level switch, the Pointek CLS100 fits in various industries and processes to provide a simple on/off control or overfill protection. You can use it in slurries, solids, foam, and more.

This device can generally withstand -30 to 100 degrees Celsius, although certain versions have a more limited range. It also has an insertion length of four inches or 100 millimeters.

You can install it in pipes and vessels with two different wetted materials, polyphenylene sulfide (PPS) or polyvinylidene fluoride (PVDF). The PPS can work from -30 to 100 degrees Celsius, and the PVDF will operate from -10 to 100 degrees Celsius.  You can also get different process connection materials and enclosure materials. Finally, it can work in gauge pressure up to 10 bar.

Why should I care?

The Pointek CLS100 offers good value supported by a strong brand with years of experience in measurement and process control. The two-wire device has different process connections and approvals for general purpose or hazardous areas. When filling out the order form, you can specify whether you’ll use it in an overfill protection application or standard application.

Courtesy of leveltransmittersupplier

The CLS100 is pretty simple but also flexible. You can deploy it in many segments, such as chemicals, pharmaceuticals, and hazardous areas.

Conclusion

The Pointek CLS100 is a solid level switch with good cost benefits. On the right, you can find similar products if you want to review other brands. Plus you can visit the Pointek CLS100 page here at Visaya to get more information.

This video from Siemens can tell you a little more about it:

 

 

Related tags: CLS100 devices English Intermediate level Level switch Measurements Point level detection Product review Review Siemens
Comments
Product Review: Pointek CLS100 from Siemens
#WishIknew - How do I find solution's concentration with conductivity sensors?
Temperature compensation in conductivity measurement
#LinkedInsights: Challenges with DP Level Transmitters
How to measure conductivity
See related devices