How do I integrate a Promag 100 into a Rockwell system based on Ethernet/IP?
Expert’s answer: How to integrate a Promag 100 into EtherNet/IP
The Promag 100 should have Dynamic Host Configuration Protocol (DHCP). That means that when you integrate a Promag 100 into EtherNet/IP network, the flow meter will assume an IP address.
You also need the Electronic Data Sheets (EDS) file to integrate the flow meter into the control system. The flow meter should already have the file. But if you need to download it, then you can do that through the control system or web browser.
You must have the EDS file to see all your variables and diagnostics and to send them into the control system!
This YouTube video will show you how to integrate the Promass 83, and you can use the same procedure for your Promag 100:
Flow meters EtherNet/IP on the market:
Converter to EtherNet/IP on the market:
Other resources that might interest you
The best flow meter: What you need to know
I have a simple application and I want a flow meter. What’s the best option?
The installation of the PROMASS 100!
How do you install a PROMASS 100? Click through to find out!
Remote display to PROMASS 100
Can you use a remote display with your PROMASS 100 device? Here’s what you need to know.
Magmeter measurement from volume to mass
Can you convert a volumetric flow measurement to mass units you have a magmeter in your process?