Hannover Messe 2017  – Full recap, all you need to know, with slides. #HM17 #VisayaHM17

Hello everyone. Hannover Messe is over and we already miss it! We were there for 5 days and had the chance to have a look in many new devices, solutions and technologies that came out. For all of those who followed us through this journey you probably saw some of the content that will be presented here in our daily recap. However, for those who are not so cool and missed out our live coverage we prepared a handfull of slides with our highlights from the fair. So here is the chance to catch up and be up to dated with what is new in industrial automation.

So without further ado, let’s dig into the slides we preapared for you guys.

Courtesy of Giphy

Let’s start at the beggining, even before going to the fair we were already hyped up.  We did our research and presented to you the “10 Companies you Should Visit at Hannover Messe 2017”

Besides the companies we also had a look at the “Top 10 technologies Hannover Messe 2017” #HM17

In our first day there we took part in the press tour and had the opportunity to watch the opening cerimony which had a very special guest, Angela Merkel. #HM17

On our 2nd day there we went after some informaton about Industry 4.0 adn Virtual and Argumented Reality

The 3rd day was the day to focus on Smart Instrumentation, FieldBuses and again Industry 4.0

Our second we went after some Industrial Internet of Things (IIoT) solutions from different companies.

The last day was all about FieldBuses and calibration for us.

To wrap up our visit at Hannover Messe 2017 we also did a Final recap with everything you should know about how it happened over there.

After Hannover Messe 2017 was over for us, at least in field, we took some time to present you with the best highlights from some specific devices and technologies. Check it out!

Pressure transmitters

Flow transmitters

Temperature transmitters

Level transmitters

Wireless solutions

Internet of Things (IoT)

Field Buses

Ok, if you are not that much into slides there are also videos available at our YouTube Channel, have a look at it!

That’s a lot of information, I know. But thats what we do. I hope you could have some new insights or became familiar with some new solutions or technologies that were presented at Hannover Messe 2017. We had a great time there and hope that you guys enjoyed as well our coverege.

Stay tuned for more news and see you next time.

Courtesy of Giphy
Recommended articles