With so many ways to measure level in a silo, it can get confusing for consumers shopping for a new level device. Fortunately, we are here to help. This article deals with the problems of silo level measurement and recommends level measurement devices for various products that are usually stored in silos.

Silo level measurement

Each silo level measurement solution has specific requirements for installation and performance, and you can fit different principles in the same application. It just depends on what your process needs and what you want. More than anything else, you need to understand those points. Otherwise, you’ll create problems.

image of Level measurement for silos
Courtesy of steel silo

Silos are often used to store solids, for example, grains, which makes solid level measurement in silos a common problem. You have many options on the market, but a new solution with strong appeal appeared shortly after Emerson Automation Solutions bought APM Automation Solutions. We’ll discuss that, along with other relevant points in silo measurement.

This article will cover these topics:

Solid level measurement in silos

Solid level measurement in silos has some odd challenges, like incrustation and dust. But you’ll find silos everywhere, which creates many scenarios to explore.

Currently, we have two standard solutions: radar and laser; one old-school method (manual), and a brand-new technology (3D scanning). Let’s go over three different industries and possible applications in each.

EcoFrog Ultrasonic level sensor with WIFI modem and WebApp

Food and beverage level measurement in a silo

Everyone thinks of grain silos here, right? It is most people’s first association when the word “silo” pops up. But a lot of food and beverage ingredients wind up in silos. Let’s talk about two of them.

Level measurement for silos sugar
Courtesy of vega
  • Sugar: One of the foundations of the industry, sugar lives in silos before going to the production process. Build-up issues can occur in sugar silos, so your solution has to work around this condition and measure the volume accurately.
  • Malt: If you like beer, then you know about malting, right? Like sugar, you’ll encounter build-up problems. And unlike sugar, you’ll also bump into dust issues. That means you need a solution to handle both and still deliver accurate numbers.
Micropilot FMR10 Free space radar level sensor for water, wastewater in all industries

Cement level measurement in silos

Yes, you’ll see silos in the cement industry. Didn’t I say we have silos everywhere? So what goes in these?

  • Coal: Part of the cement process constantly sends coal from the silo to the production line. If you have an event, then the operator needs a way to shut down the process. So the level solution here should constantly provide reliable data.
  • Cement: After production but before the water and mixing and footprints, the not-yet-cement goes into silos. Usually, unmixed cement creates a lot of dust – like malt, but with less tasty results. Anyway, you get build-up and accuracy factors here too.

Measuring level in mining silos

I’m sure you’re getting the idea, but we’ll hit one more example before we move on.

Level measurement for silos in mining sector
Courtesy of vega

Granular Potash: The final product usually winds up in a big dome-shaped silo. Ever seen one of those? Regardless, the challenge to measure volume in this area can affect inventory.

Types of solid level measurement

It’s fascinating how many ways we’ve come up with to measure level in solids, from simple to fancy. Some of these methods have a requirement list as long as your arm! Check out a few of the options:

As I’ve said before, any option has pros and cons. So let’s get into the details of four ways to measure silo levels.

Manual level measurement

Yup, no joke and no Industry 4.0 at all! It seems hard to believe, but some companies out there still measure level manually. One of the biggest drawbacks to this method is making sure the worker measured the level correctly.

For one, the measuring device must always be stored and handled properly. For two, the measuring must happen the same way every time. Even if you have the same person doing it every time, you always have to leave room for human error.

Machines can’t do everything – yet – but they definitely stand as the better way to do this one thing. So let’s discuss a few of those.

Radar level measurement

Radar level measurement is a great option for level measurement for silos. Some companies using guided wave radars, and others deploy free-space radars. So what’s the best option? All our regular readers know the answer to this question – it depends on your application.

radar level measurement for silos
Courtesy of bannerengineering

The free space radar can measure a long-range and doesn’t make contact with the product. In most of the models on the market, you’ll get an accuracy of +-2 millimeters (mm). And guided radars can measure short and medium distances, but the sensor comes in contact with the product. It has about the same accuracy.

In the minus column, any radar device will only measure one spot, and you have to have the sensor angled properly to measure the right point.

In the plus column, if you use linearization you can measure the mass and volume of your product. This sort of measurement doesn’t show the profile of the product inside the tank, but maybe you don’t need that.

Laser level measurement

Once upon a time not terribly long ago, people considered lasers the cutting edge of technology. Now we use them as toys.

Still, they have their place in work as well, and they’ve become more popular in level measurement for silos. Back when I used to visit customers, I remember seeing laser devices side by side with radar to check performance in applications.

Level measurement for silos lazer
Courtesy of azom

We have a similar problem here, though – you only measure one spot in the pile of product. Through linearization, you can get a similar result as the radars.

3D level scanner

Now we come to the latest solution. To improve measurements in silos, vendors developed 3d level scanners.

The 3D level scanner sends low-frequency acoustic waves to multiple points on the product in the silo. The product reflects the waves back to the scanner’s three antennas.

The low frequencies perform better in dust than the high frequencies used in other level meters. And the three antennas can triangulate the signals that return to them, so the device can create an X, Y, and Z graph with the data.

3D sensor Level measurement for silos
Courtesy of bulkinside

Now you can calculate the volume present in the silo. Also, you can view the product format using specific tools. In large silos, you may need more than one 3D meter to scan the whole silo.

So why hasn’t everyone switched to these gadgets? Because they cost more, of course. The wallet makes the final decision in most cases. And as I mentioned before, you may want all the tiny details, but you may not need it for your application.

Field communication – what’s the best option?

No matter which device you pick, you’ll need a way to get its data from it to you. Due to the height and difficulty of access inherent in silos, I recommend wireless all the way. A wireless connection brings easy integration and remote access.

You’ll have an uphill climb – in the snow, barefoot, carrying your little sister on your back – to convince me otherwise, but you can always give it a go in the comments.


So if you have a silo full of product that you need to keep an eye on, then you have several factors to mull, among them:

  • How much money and time do you have to invest?
  • What type of measurement do you need?
  • How much risk is involved?
  • Can you get local support from the vendor?
  • Does your team need training in order to use the device?

If you are having trouble finding the right level measurement device, take a look at our level measurement smart assistant.

Find and buy level measuring devices in our online shop

If you would like to know more about silo level measurement, don’t hesitate to give us a call and our experts will help.

Recommended articles